3A,4A,5A,carbon molecular sieve as catalyst for air separation industry

3A,4A,5A,carbon molecular sieve as catalyst for air separation industry 1.Beads 4*8mesh 8*12mesh 2.Pellets 1/16 inch 1/8 inch

3A,4A,5A,carbon molecular sieve as catalyst for air separation industry

Molecular Sieve 3A is an alkali metal alumina-silicate; it is the potassium form of the type A crystal structure. Type 3A has an effective pore opening of about 3 angstroms (0.3nm). This is large enough to allow in moisture, but excludes molecules such as unsaturated hydrocarbons which can potentially form polymers; and this maximizes lifetime when dehydrating such molecules.

 

Typical Chemical Formula0.45 K2O . 0.55 Na2O . Al2O3 . 2 SiO2 . 4.5H2OSiO2 : Al2O3 ≈2

 

Technical Parameter 

Item	Unit	Technical data
Shape		Pellet		Sphere
Diameter	/	1/16 inch	1/8 inch	8*12 mesh	4*8mesh
Size ratio up to grade	%	≥98	≥98	≥96	≥96
Bulk density	g/ml	≥0.65	≥0.65	≥0.70	≥0.70
Wear ratio	%	≤0.20	≤0.25	≤0.10	≤0.10
Crushing strength	N	≥45/cm	≥60/cm	≥45/piece	≥85/piece
Static water adsorption	%	≥21	≥21	≥21	≥21
Water content, as shipped	%	≤1.5	≤1.5	≤1.5	≤1.5

  

 

 

 

 

 

 

 

 

 

 

 

Typical Application1) Drying of unsaturated hydrocarbons (e.g. ethylene, propylene, butadiene) 2) Cracked Gas Drying3) Drying of natural gas, if COS minimization is essential, or a minimum co-adsorption of hydrocarbons is required. 4) Drying of highly polar compounds, such as methanol and ethanol5) Drying of liquid alcohol6) Static, (non-regenerative) dehydration of insulating glass units, whether air filled or gas-filled.7) Drying of refrigerants

 

RegenerationXINTAO molecular sieve Type 3A can be regenerated by either heating in the case of thermal swing processes; or by lowering the pressure in the case of pressure swing processes. To remove moisture from a 3A molecular sieve, a temperature of 200-230°C is required. A properly regenerated molecular sieve can give moisture dew points below -100°C.The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process.

 

Size 3A – zeolite are available in beads of 1-2 mm, (10x18 mesh) 2-3 mm, (8x12 mesh) , 2.5-5 mm, (4x8 mesh) and as powder, and in pellet 1/16inch 1/8inch 

AttentionTo avoid damp and pre-adsorption of organic before running, or must to be reactivated.

 

3A,4A,5A,carbon molecular sieve as catalyst for air separation industry